Road Infrastructure Management (RIM)

The Transport Certification Australia (TCA) Road Infrastructure Management (RIM) application provides a new way of collecting road use data from vehicles to better inform and optimise the management of road networks.

RIM can be required for heavy vehicles operating under Notice or Permit.

View our pricing

Where RIM is a required Telematics Condition

Road Infrastructure Management (RIM)

Class 3 Livestock Transportation Exemption Notice 2021 (Livestock Loading Scheme)

Commencement Date: 26th February 2021
NSW

This Notice provides mass exemptions that support the New South Wales Livestock Loading Scheme and includes access to the New South Wales Farm Gate Network.

Road Infrastructure Management (RIM)

Class 3 Grain Harvest Management Scheme Mass Exemption Notice 2021 (Grain Harvest Management Scheme)

Commencement Date: 26th February 2021
NSW

This Notice exempts a heavy vehicle to which it applies from stated prescribed mass requirements in Schedule 1 of the Heavy Vehicle (Mass, Dimension and Loading) National Regulation and includes access to the New South Wales Farm Gate Network.

Road Infrastructure Management (RIM)

Farm Gate Access Scheme

Commencement Date: 26th February 2021
NSW

Provides exemptions for eligible heavy vehicles to access council roads within approved areas without Permit.

Road Infrastructure Management (RIM)

Class 1 Oversize Overmass Vehicle Movement Scheme

Commencement Date: 1st June 2020
NSW

Transport for NSW (TfNSW) has introduced a new option for vehicles performing Oversize Overmass (OSOM) movements in NSW with extended duration permits.

Road Infrastructure Management (RIM)

Safety, Productivity, Construction, and Environment Transport Scheme (SPECT Scheme)

Commencement Date: 1st July 2016
NSW

SPECTS allows participating heavy vehicles greater network access and the ability to carry more construction materials, in return for meeting higher environmental, safety and compliance standards.

Road Infrastructure Management (RIM)

Port Botany Container Movement Efficiency Scheme

Commencement Date: 11th June 2019
NSW

Eligible vehicles carrying one or more shipping containers to or from a prescribed stevedore’s terminal can benefit from Concessional Mass Limits (CML) with an exemption to specific mass requirements under the National Heavy Vehicle Law (NHVL).

Where RIM may be required

Advised Application

Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

Exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Advised Application

Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

For Heavy Vehicles
DRIVE EASY Compliance TelematicsDRIVE EASY PricingRoad Infrastructure Management Application (RIM)Telematics Monitoring Application (TMA)Platform & Dashboard
For any Asset
Hercules HardwareAsset Tracking PricingCustom IoT Hardware
Policies & Privacy
Privacy Policy

Copyright © V-DAQ Pty Ltd 2021