Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Application
The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advisory information for operators:

Telematics conditions will be added to the Notice in 2021. An eligible vehicle may be required to participate in a telematics application from 1 July 2021. Further consultation will be undertaken with industry prior to the implementation of a telematics condition.

Additional Information:

Gazette Notice

NHVR Website

New South Wales Class 1 Load Carrying Vehicle Operator’s Guide

Other schemes where a Telematics Condition is required

Telematics Monitoring Application (TMA)

PBS Vehicle Monitoring Scheme

Commencement Date: 1st of July 2020
TAS

Required to obtain access under Notice or via Permit for PBS Level 2 vehicle combinations exceeding 26m in length.

Road Infrastructure Management (RIM)

Class 1 Oversize Overmass Vehicle Movement Scheme

Commencement Date: 1st June 2020
NSW

Transport for NSW (TfNSW) has introduced a new option for vehicles performing Oversize Overmass (OSOM) movements in NSW with extended duration permits.

Road Infrastructure Management (RIM)

Port Botany Container Movement Efficiency Scheme

Commencement Date: 11th June 2019
NSW

Eligible vehicles carrying one or more shipping containers to or from a prescribed stevedore’s terminal can benefit from Concessional Mass Limits (CML) with an exemption to specific mass requirements under the National Heavy Vehicle Law (NHVL).

Advised Application

Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advised Application

Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

Exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Telematics Monitoring Application (TMA)

Special Purpose Vehicles (SPV) Monitoring Scheme

Commencement Date: 12th August 2019
TAS

Required to obtain access under Notice or via Permit for specific Special Purpose Vehicles (SPVs)