NSW Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Application
The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advisory information for operators:

Telematics conditions will be added to the Notice in 2021. An eligible vehicle may be required to participate in a telematics application from 1 July 2021. Further consultation will be undertaken with industry prior to the implementation of a telematics condition.

Additional Information:

Gazette Notice

NHVR Website

New South Wales Class 1 Load Carrying Vehicle Operator’s Guide

Other schemes where a Telematics Condition is required

Road Infrastructure Management (RIM)

NSW Safety, Productivity, Construction and Environment Transport Scheme (SPECTS)

Commencement Date: 1st July 2016
NSW

SPECTS allows participating heavy vehicles greater network access and the ability to carry more construction materials, in return for meeting higher environmental, safety and compliance standards.

Telematics Monitoring Application (TMA)

NSW Class 3 Livestock Transportation Exemption Notice 2020

Commencement Date: 8th October 2020
NSW

B-triples and AB-triples can now operate under this Notice if they are enrolled in the Telematics Monitoring Application (TMA), removing the need for IAP enrollment.

Road Infrastructure Management (RIM)

NSW Port Botany Container Movement Efficiency Scheme

Commencement Date: 11th June 2019
NSW

Eligible vehicles carrying one or more shipping containers to or from a prescribed stevedore’s terminal can benefit from Concessional Mass Limits (CML) with an exemption to specific mass requirements under the National Heavy Vehicle Law (NHVL).

Road Infrastructure Management (RIM)

NSW Class 1 Oversize Overmass Permits

Commencement Date: 1st June 2020
NSW

Transport for NSW (TfNSW) has introduced a new option for vehicles performing Oversize Overmass (OSOM) movements in NSW with extended duration permits.

Telematics Monitoring Application (TMA)

NSW Higher Mass Limits (HML) Scheme

Commencement Date: 2nd April 2020
NSW

A new Higher Mass Limits (HML) Notice came into effect on 2nd April 2020 that allows HML heavy vehicles operating in NSW to be enrolled in Telematics Monitoring Application (TMA) instead of the Intelligent Access Program (IAP).

Advised Application

NSW Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advised Application

NSW Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

Exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Telematics Monitoring Application (TMA)

TAS PBS Vehicle Monitoring Scheme

Commencement Date: 1st of July 2020
TAS

Required to obtain access under Notice or via Permit for PBS Level 2 vehicle combinations exceeding 26m in length.

Telematics Monitoring Application (TMA)

TAS Special Purpose Vehicles (SPV) Monitoring Scheme

Commencement Date: 12th August 2019
TAS

Required to obtain access under Notice or via Permit for specific Special Purpose Vehicles (SPVs)