NSW Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Application
Advised Commencement Date: 1st July 2021
NSW
The New South Wales Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice 2020 exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Telematics conditions will be added to the Notice in 2021. An eligible vehicle will be required to participate in a telematics application from 1 July 2021. Further consultation will be undertaken with industry prior to the implementation of a telematics condition.

NHVR Website

New South Wales Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice Operator’s Guide

Other schemes where a Telematics Condition is required

Road Infrastructure Management (RIM)

NSW Class 3 Livestock Transportation Exemption Notice 2021

Commencement Date: 26th February 2021
NSW

This Notice provides mass exemptions that support the New South Wales Livestock Loading Scheme and includes access to the New South Wales Farm Gate Network.

Road Infrastructure Management (RIM)

NSW Class 3 Grain Harvest Management Scheme Mass Exemption Notice 2021

Commencement Date: 26th February 2021
NSW

This Notice exempts a heavy vehicle to which it applies from stated prescribed mass requirements in Schedule 1 of the Heavy Vehicle (Mass, Dimension and Loading) National Regulation and includes access to the New South Wales Farm Gate Network.

Telematics Monitoring Application (TMA)

NSW Class 3 Livestock Transportation Exemption Notice 2021

Commencement Date: 8th October 2020
NSW

B-triples and AB-triples can now operate under this Notice if they are enrolled in the Telematics Monitoring Application (TMA), removing the need for IAP enrollment.

Telematics Monitoring Application (TMA)

NSW Higher Mass Limits (HML) Scheme

Commencement Date: 2nd April 2020
NSW

A new Higher Mass Limits (HML) Notice came into effect on 2nd April 2020 that allows HML heavy vehicles operating in NSW to be enrolled in Telematics Monitoring Application (TMA) instead of the Intelligent Access Program (IAP).

Road Infrastructure Management (RIM)

NSW Safety, Productivity, Construction and Environment Transport Scheme (SPECTS)

Commencement Date: 1st July 2016
NSW

SPECTS allows participating heavy vehicles greater network access and the ability to carry more construction materials, in return for meeting higher environmental, safety and compliance standards.

Road Infrastructure Management (RIM)

NSW Port Botany Container Movement Efficiency Scheme

Commencement Date: 11th June 2019
NSW

Eligible vehicles carrying one or more shipping containers to or from a prescribed stevedore’s terminal can benefit from Concessional Mass Limits (CML) with an exemption to specific mass requirements under the National Heavy Vehicle Law (NHVL).

Road Infrastructure Management (RIM)

NSW Class 1 Oversize Overmass Permits

Commencement Date: 1st June 2020
NSW

Transport for NSW (TfNSW) has introduced a new option for vehicles performing Oversize Overmass (OSOM) movements in NSW with extended duration permits.

Advised Application

NSW Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advised Application

NSW Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Commencement Date: 1st July 2021
NSW

Exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Next
For Heavy Vehicles
DRIVE EASY Compliance TelematicsDRIVE EASY PricingRoad Infrastructure Management Application (RIM)Telematics Monitoring Application (TMA)Platform & Dashboard
For any Asset
Hercules HardwareAsset Tracking PricingCustom IoT Hardware
Policies & Privacy
Privacy Policy

Copyright © V-DAQ Pty Ltd 2021