nsw-class-3-livestock-transportation-exemption-notice-2020

NSW Class 3 Livestock Transportation Exemption Notice 2020

Telematics Monitoring Application (TMA)

Commencement Date: 8th October 2020

NSW

This Notice provides mass exemptions that support the New South Wales Livestock Loading Scheme.

B-triples and AB-triples can now operate under this Notice if they are enrolled in the Telematics Monitoring Application (TMA), removing the need for IAP enrollment.

Other schemes where a Telematics Condition is required

Telematics Monitoring Application (TMA)

NSW Higher Mass Limits (HML) Scheme

Commencement Date: 2nd April 2020

NSW

A new Higher Mass Limits (HML) Notice came into effect on 2nd April 2020 that allows HML heavy vehicles operating in NSW to be enrolled in Telematics Monitoring Application (TMA) instead of the Intelligent Access Program (IAP).

Road Infrastructure Management (RIM)

NSW Safety, Productivity, Construction and Environment Transport Scheme (SPECTS)

Commencement Date: 1st July 2016

NSW

SPECTS allows participating heavy vehicles greater network access and the ability to carry more construction materials, in return for meeting higher environmental, safety and compliance standards.

Road Infrastructure Management (RIM)

NSW Port Botany Container Movement Efficiency Scheme

Commencement Date: 11th June 2019

NSW

Eligible vehicles carrying one or more shipping containers to or from a prescribed stevedore’s terminal can benefit from Concessional Mass Limits (CML) with an exemption to specific mass requirements under the National Heavy Vehicle Law (NHVL).

Road Infrastructure Management (RIM)

NSW Class 1 Oversize Overmass Permits

Commencement Date: 1st June 2020

NSW

Transport for NSW (TfNSW) has introduced a new option for vehicles performing Oversize Overmass (OSOM) movements in NSW with extended duration permits.

Advised Application

NSW Schedule of the Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice

Advised Commencement Date: 1st July 2021

NSW

The Multi-State Class 1 Load Carrying Vehicles Dimension Exemption Notice allows eligible Class 1 load carrying vehicles in NSW to operate up to 5.0m wide, 5.0m high, 30.0m long and 7.5m rear overhang on approved (state owned) routes in NSW, and in compliance with the conditions of the Notice and this Operator’s Guide.

Advised Application

NSW Class 1 Load Carrying Combination (Hunter Region) Mass and Dimension Exemption Notice

Advised Commencement Date: 1st July 2021

NSW

Exempts class 1 heavy vehicle combinations consisting of a prime mover and approved trailers, including dollies if required, from certain mass and dimension requirements under the HVNL. In addition, this notice exempts certain specialist vehicles such as block trucks that are used to assist the operation of class 1 combinations.

Telematics Monitoring Application (TMA)